The solar panel shop

HQRP 20 Amp 12V / 24V Solar Charge Controller for Solar Energy and Lighting Control 300W with LED /LCD Display plus HQRP UV Tester

Rating: List Price: unavailable Sale Price: $29.91 Availability: Usually ships in 24 hours Eligible For Free Shipping

Product Description

HQRP Solar Charge Controllers are high quality, efficient and reliable Solar Power Regulators. Suitable for all 12/24v DC Lamps. They are perfect for rural electrification system. They offer a lot of possibilities and benefits. Can be used to control lighting devices. Regulations point: 14.4 Volts; Low voltage Disconnect: 11.1V Volts; Low voltage Reconnect: 12.6 Volts; Microcontroller digital accuracy; Type of Charging: Series PWM & stat of charge(SOC); 4 Stages: equalization, PWM, Boost and Float, temperature compensated charging; Electronic protections: Short circuit and over current-solar and load; Reverse polarity-solar, load, battery; Reverse current at night; Limits high voltage to protect loads; Lighting protection; Tropicalization: Conformal coated printed circuit board; Self-consumption: 6mA maximum. Solar Controller supports up to 300W of 12V Solar panels and up to 600W of 24V Solar panels. For 12V solar panels, please, use battery and load for 12V solar systems (For 24V solar panels, please, use battery and load for 24V solar systems).

The large diameter, big interval terminals, can install 6 mm2 conducting wire , wire interval is 9.5 mm, can enhance the isolation and the installation reliability.

HQRP UV Chain / UV Radiation Tester: To know the Solar UV Index, it is enough to compare the colorchange with the 4 standard colors around. Very light purple: low intensity, UV index 1-2. Sun-protection not necessary. Light purple: medium intensity, UV index 3-5. Sun-protection is recommended. Purple: strong intensity, UV index 6-7. Sun-protection is necessary. Dark purple: very strong intensity, UV index 8-11. This tester shows you the level of UV radiation and helps you protect your eyes and skin from negative sunlight effect, but this meter doesn't show sunlight intensity for solar panels.

Details

• HQRP®Solar Charge Controller plus HQRP® UV Chain / UV Radiation Health Tester;
• Work Voltage: 12v / 24v Avto; Continuous load/charge current: 20A;
• Electronic Protection; PWM Charge Mode (SOC); Microcontroller Digital Accuracy;
• Full Automatic operation;
• 200 days warranty!

HQRP 10A Solar Panel Power Battery Charge Controller / Regulator 12V / 24V 10 Amp 150W with PWM Type of Charging plus HQRP UV Chain / UV Radiation Health Tester

Rating: List Price: unavailable Sale Price: $20.91 Availability: Usually ships in 24 hours Eligible For Free Shipping

Product Description

Regulations point: 14.4 Volts; Low voltage Disconnect: 11.1V Volts; Low voltage Reconnect: 13.1 Volts; Microcontroller digital accuracy; Type of Charging: Series PWM & stat of charge(SOC); 4 Stages: equalization, PWM, Boost and Float, temperature compensated charging; Electronic protections: Short circuit and over current-solar and load; Reverse current at night; Limits high voltage to protect loads; Lighting protection; Tropicalization: Conformal coated printed circuit board; Self-consumption: 6mA maximum. Solar Controller supports up to 150W of 12V Solar panels and up to 300W of 24V Solar panels. For 12V solar panels, please, use battery and load for 12V solar systems (For 24V solar panels, please, use battery and load for 24V solar systems). HQRP UV Chain / UV Radiation Tester: To know the Solar UV Index, it is enough to compare the colorchange with the 4 standard colors around. Very light purple: low intensity, UV index 1-2. Sun-protection not necessary. Light purple: medium intensity, UV index 3-5. Sun-protection is recommended. Purple: strong intensity, UV index 6-7. Sun-protection is necessary. Dark purple: very strong intensity, UV index 8-11. This tester shows you the level of UV radiation and helps you protect your eyes and skin from negative sunlight effect, but this meter doesn't show sunlight intensity for solar panels.

Details

• HQRP® Solar Charge Controller plus HQRP® UV Chain / UV Radiation Health Tester;
• Regulation point:14.4 Volt; Low voltage disconnect:11.1 Volt;
• Low voltage Reconnect: 12.5 Volt; Self-consumption: 6mA maximum;
• Electronic protections; Terminals:for wire sizes to 2.5mm2;
• Type of Charging: series PWM. 200 days warranty!

Solar Panel Charge Controller - 3 Amp / 12 Volt

Rating: List Price: $19.99 Sale Price: $11.00 Availability: Usually ships in 1-2 business days

Product Description

According to the voltage of the battery, the controller will adjust the charging current and decide if necessary to supply power to the load, keeping the battery on full voltage condition. Also prevents the battery from over-charging or over-discharging and prevents re-flow of current back to panels at nighttime.

Details

• Provides voltage status
• Prevents battery over-charging
• Prevents Battery from over-discharge
• Prevents power reflow to solar panels

Morningstar ProStar 30 Charge Controller with Meter

Rating: List Price: unavailable Sale Price: $177.25 Availability: Usually ships in 24 hours Eligible For Free Shipping

Product Description

These are the "Top of the line" in charge controllers for small systems. The ProStar 30 features "intelligent" charge controlling that will significantly improve battery life and performance. Settings for sealed or flooded batteries, low voltage disconnect, temperature compensation and PWM (pulse width modulation) battery charging. LCD display shows battery voltage, solar amps and load amps. For 12V or 24V systems, rated PV current 30 amps, rated load current 30 amps. Specifications: Model #: PS-30M Battery Vdc (voltage direct current): 12/24 Solar Amps: 30 A Load Amps: 30 A Weight: 1 lb./.45 kg Dimensions: 6" x 4.1" x 2.1"/ 152.4 x 104.14 x 53.34 mm Warranty info: 5 year limited warranty from manufacturer

Details

No features available.